Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone
Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone
The vacuum regulator is designed to regulate the vacuum pressure in the system required for normal milking machine operation.
The receiver lid assembly is intended for installation on a vacuum system to create a vacuum.
The receiver cover is designed to be mounted on the vacuum system to create a vacuum.
The receiver lid gasket is designed to seal the cover in the receiver.
The graphite shovel 70x45x5 is designed for dry-running rotary pumps with a groove size of 70x45x5 mm.
The graphite vane 70x45x5 is designed for dry-running rotary pumps with a groove size of 70x45x5 mm.
The graphite shovel 50x45x5 is designed for dry-running rotary pumps with a slot size of 50x45x5 mm.
The graphite vane 50x45x5 is designed for dry-running rotary pumps with a slot size of 50x45x5 mm.
Textolite shovel 50x45x5 is designed to fit into rotary lube oil pumps with 50x45x5 mm slots
The silencer is designed to reduce noise and create a comfortable sound when the vacuum unit is running.
The muffler is designed to reduce noise and create a comfortable sound when the vacuum unit is operated and the waste oil is discharged into the sump.
The oiler on the milking machine is designed to drip oil into the working chamber.
The vacuum gauge is used to measure and control the vacuum pressure in the system required for normal milking machine operation.
Накостыльник предназначен для установки на ножки доильного аппарата для предотвращения вибрации и скольжения по поверхности.
The switch-off button is used to switch the milking machine on and off.
The plastic wheel is designed to be mounted on the frame of the Burenka milking parlour to move it around comfortably.
The bearing is designed to fit into the flange of the vacuum pump at the front of the electric motor.
The bearing is designed for mounting in the rear of the engine.
The oil seal is designed to fit in the flange of the vacuum pump at the front of the electric motor in front of the bearing.
The impeller is designed for cooling the electric motor and is fitted to the rear.
Лопатки, вакуумметр, вакуумрегулятор, глушитель.