The rubber in the DD.00-041A is designed for use in milking machines for cows and has a service life of up to 8 months. The recommended and optimum service life is 6 months, after which it must be replaced with a new one. ПОЛУЧИТЬ БЕСПЛАТНО
The silicone teat rubber DD.00-041A is designed for milking machines for cows and has a service life of approx. 2 years without deterioration. It is recommended to heat treat every 6 months, after which it can be used again.
The silicone teat rubber is intended for use in goat and sheep milking machines and has a service life of approx. 2 years without deterioration. A heat treatment is recommended every 6 months.
The polypropylene milking cup is designed for use in the basic set of low-cost models of milking machines for milking cows.
The stainless steel milking cup with polypropylene head is designed for use in middle-class milking machines for milking cows.
The solid stainless steel milking cup is designed for use in all premium milking machines for milking cows.
The plastic milking cup is designed to be mounted on all milking machines for milking goats and sheep.
The headband is designed to be mounted on a combination stainless steel cup.
The connection ring is used to connect the PVC milk hose and the 7x14 vacuum tube into a single line.
The goat milking machine connector is used to connect the milk and vacuum hoses into one system.
The plastic clamp is used to cut off the air flow through the teat rubber when creating a vacuum in the milking system.
The MAYGA collector with a capacity of 140 cm3 is intended for collecting milk from the milking cups and transferring it to the milking bucket.
The collector lid "MAYGA" 140 cm3 complete with plug and gasket is intended for the collector assembly.
The MAYGA 140 cm3 collector lid is intended to be fitted to the collector.
The collector gasket "MAIGA" 140 cm3 is designed to seal the collector lid and base plate.
The MAYGA collector plug 140 cm3 is intended to cover the hole in the collector lid, used when clips are available.
The MAYGA 140 cm3 collector base is designed to connect the milking cups and vacuum tubes into a single system.
The Miga 140 cm3 collector distributor is designed to distribute the vacuum from the pulsator to the milking cups.
The collector Mayga 240 cm3 is designed to collect milk from the milking cups and transfer it to the milking bucket. It can be attached to any milking machine as an additional option.
The 240 cm3 MAYGA pair collector is used to collect milk from the milking cups and transfer it to the milking bucket. It is installed on milking machines with a paired milking system.
The MAYGA 240 cm3 collector lid, complete with valve and gasket, is intended for collector assembly.
The MAYGA 240 cm3 collector lid is intended to be installed on the collector.