Motor Sich 100-18 (metal) cream separator is designed for separation of whole milk into cream and skimmed milk with simultaneous cleaning from contamination.
The Motor Sich-100 separator is designed to separate high-fat milk into skim milk and cream, while cleaning out impurities. The Motor Sich separator can process up to 100 litres of milk in 1 hour. A bowl of 12 litre milk can be used to fill a minimum of 6 litre, which is 50% of the bowl. For best results, the milk is heated to 40-50° and then poured into the bowl of the separator while it is turning. At the same time the cream is separated from the milk in the cream separator. The separator has two drain tubes - one for the cream and one for skimmed milk. They are differentiated by volume, the cream flow is much thinner.The separator works by the rapid rotation of the drum, in which a centrifugal force acts on the milk, ensuring that the milk is separated. The drum in domestic separators runs at over 10,000 revolutions per minute. This quickly separates the milk into two parts: skim milk and fat milk.
|Milk capacity, l/h, max.||100|
|Drum speed, rpm||10500|
|Number of plates in the drum, pcs.||10-12|
|Milk tank capacity, l||12|
|Fat content of the slurry, max.||0,05|
|Adjustment range for volume ratios|
|1:4 - 1:10|
|Electricity consumption, kWh, max.||0,120|
|Overall dimensions, mm:|
|- bowl diameter||365|
|Weight, max. kg||6|
|Country of manufacture:||Ukraine|
|Sludge discharge:||automatic continuous|