Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone

Сall back Write to us
Reduced price! Доильный аппарат Буренка-1 нержавейка 3000 Expand

Dry Milking machine "Byrenka-1 nerzhaveyka"

New

Dry Milking machine "Byrenka-1 nerzhaveyka" is intended for domestic purposes and for milking from 1 to 5 cows. The system is equipped with a 3000 rpm dry rotary vacuum unit and one 20 litre aluminium milk bucket with single stainless steel cups, an aluminium lid on the bucket.

More details

  • Stainless (metal)
  • Rubber (black, replacement 6 months.)
  • Silicone (transparent, replacement 2 years)
  • Standard 140 cm3 (plastic)
  • Increased 240 cm3 (plastic, soft milking)
  • Aluminum (metal)
  • Push pull (synchronous)
  • Pairwise (manual milking imitation) / Bucket lid transparent
  • без БЗН
  • с БЗН

10 100,00 грн

10 300,00 грн

-200,00 грн

Dry Milking machine "Byrenka-1 nerzhaveyka"

Dry Milking machine "Byrenka-1 nerzhaveyka" is designed for domestic use and maintenance from 1 to 5 cows. It is equipped with a dry rotor type installation at 3000 rpm and one 20 liter aluminum milk bucket with solid stainless steel cups, aluminium lid on the bucket and standard collector 140 cm2.

Main advantages:

  • Dry rotary pump
  • Aluminium Milking Bucket
  • Stainless teat cups
  • Aluminium Milking Bucket lid


General characteristics:

  • Type of milking machine: stationary with a mobile vacuum unit;
  • Recommended continuous working time: 60 minutes, rest 40 minutes;
  • Working temperature of the pump: 80-90 ° С;
  • Recommended productivity: 5 cows;
  • Simultaneous milking: 1 cow;
  • Milking time per cow: 6-8 minutes;
  • Material of milking tank: aluminum;
  • Milk tank capacity: 20 l .;
  • Material of milking cup: stainless steel;
  • Milk tank lid material: aluminum.


Specifications:

  • Vacuum pump: dry rotary vane type;
  • Pump material: cast iron;
  • Engine winding material: copper;
  • Number of plates: 2 pcs .;
  • Plate material: graphite;
  • Electric power: 0.75 kW;
  • Power supply: 220V single-phase;
  • Maximum vacuum pressure: 0.06 MPa (60 kPa);
  • Vacuum volume at idle speed: 220 l / min (7m3 / h);
  • Shaft rotation speed: 3000 rpm


A milking machine is included:

1. Aluminum milking bucket on 20 liters.
2. PVC milk hose 2 metres long.
3. Gasket lid milking bucket with sealing skirt.
4. Aluminium lid for milking bucket..
5. Polypropylene tee and corner.
6. Vacuum hose 11x23 with a length of 2 m.
7. Pulsator unregulated.
8. Vacuum tube 7x14, length 2 m.
9. Plastic collector 140 cm3.
10. Rubber nipple - 4 pcs.
11. Polypropylene clamp - 4 pcs.
12.Vacuum tube 7x14 transparent, length 1 m.
13. Stainless steel teat cup - 4 pcs.
14. Brushes for washing 1 set (two short and one long).
15. Technical documentation and passport with warranty card.

Complete set of vacuum unit:

1. Dry rotary vacuum pump with two graphite plates and a 0.75 kW electric motor at 3000 rpm. It is equipped with a switch-off button and a 2 m long electric cable with earthing plug.
2. High efficiency silencer.
3. Metal frame with retractable handle and 3-liter receiver.
4. Plastic wheel - 2 pcs.,
5. Transparent receiver cover with gasket - 2 pcs.,
6. Vacuum regulator.
7. Vacuum gauge.
8. Corner with a transparent hose to connect the pump to the receiver.

Overall dimensions:

Vacuum installation:
- The size of the box: 56x39x42 cm;
- Weight: 23 kg.
 Milking bucket:
- The size of the box: 30x30x50 cm;
- Weight: 7 kg.

Country of origin - Ukraine

Manufacturer - Burenka

Производительность1-5 коровы
LinerRubber (black)
Teatcup ShellStainless (metal)
Milking ClawStandard 140 cm3 (plastic)
Bucket LidAluminum (metal)
Milking systemPush pull (synchronous)
Pump Protection Unitwithout BZN (without protection against moisture)
Shaft rotation speed3000 rpm
Number of plates in the pumpGraphite - 2pcs
Pump typeDry rotary
Гарантия24 месяца
Доставка/ОплатаДоставка до 5 дней/Оплата при получении
ПредназначениеДля коров
МатериалКаучук