Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone

Сall back Write to us
Reduced price! Доильный аппарат Белка-2 мини 3000 Expand

Dry Milking machine "Bilka-2 mini" 1 bucket of 20 liters. for 2 goats

New

Dry Milking machine "Bilka-2 mini" is intended for milking from 1 to 40 goats per hour, complete with a vacuum pump on a frame with an air receiver and an imported aluminum milk can on 20 liters, two sets of milking equipment with durable transparent cups, silicone nipple rubber and polypropylene lid on the can.

More details

  • Polypropylene (plastic)
  • Silicone (transparent, replacement 2 years)
  • Polycarbonate (transparent)
  • Aluminum 20 L
  • Сухого типа 3000 об/мин
  • Сухого типа 1500 об/мин
  • Масляного типа 3000 об/мин
  • без БЗН
  • с БЗН

11 000,00 грн

11 200,00 грн

-200,00 грн

Dry Milking machine "Bilka-2 mini" is designed for use in households or small farms, and is designed to service from 1 to 40 goats per hour.

The dry rotary vacuum pump is easy to start in cold weather, simple to operate, easy to maintain and with a number of technical upgrades has become much more powerful and at the same time quieter than its predecessor. The vacuum pump is mounted on a handy frame with two sturdy wheels and an extendable handle that makes it easy to move the milking machine in any direction. Underneath the frame there is a large reservoir with two transparent lids so you can check for condensate and drain it in time.

Milking a goat is the most labour-intensive and complex process. Milking accounts for more than half of the labour costs of maintaining goats. Milk produced by hand is mechanically and bacterially contaminated. Hand milking causes occupational hand disease for the milkmaids due to the large number of repetitive movements. Using the milking machine will give you clean milk, increase productivity and reduce the cost of milking.

By buying the milking machine "Belka-2 mini" you invest in your health and the health of your goat, improve milk quality, save time on servicing goats and get pleasure from the use of quality milking equipment.

General information:

  • Machine type: stationary;
  • Maximum capacity of 40 goats per hour;
  • Simultaneous milking of 2 goats;
  • Material of milk tank: aluminium;
  • Capacity of the milk tank: 20 l;
  • Type of teat cups: plastic;
  • Milk tank lid: polypropylene;
  • Chassis design: wheeled trolley;

The vacuum installation of the milking machine consists of an electric motor and a dry rotary pump, which is installed on the motor shaft without any couplings or pulleys. This construction makes the milking unit small and compact, but powerful and high productive.

The air-cooled dry rotary vacuum pump is designed to produce the vacuum needed for smooth milking machine operation and productive milking of cows. It is easy to start and work in cold weather and does not freeze, unlike oil pumps.

Inside the vacuum pump there is a rotating rotor (1), inside which the graphite vanes (2) move freely. As the rotor rotates, the vanes move in the grooves, changing the working volume in the chamber. During suction, the volume increases, creating a vacuum between the blades; when the volume between the blades decreases, the pressure increases and the air escapes through the silencer. 

Complete with vacuum unit:

1. Vacuum pump is a dry rotary pump with two graphite plates and a 0.75 kW electric motor at 3000 rpm. Supplied with switch-off button and 2 m electric cable with grounding plug.

2. High efficiency silencer.

  • Technical specifications: Vacuum pump: dry rotary vane type;
  • Number of plates: 2 pcs;
  • Plate material: Graphite;
  • Electric power: 0.75 kW;
  • Electricity supply: 220V single-phase;
  • Max. vacuum pressure: 0.06 mPa (60 kPa);
  • Volume of pumped air at idle speed: 220 l/min (7m3/hour);
  • Shaft speed: 3000 rpm; Speed of shaft rotation.

Mass dimensions:

  • Vacuum unit:
    - Box size: 56x39x42 cm;

    - Weight: 26 kg.

    Milking bucket:
    - Box size: 30x30x50 cm;

    - Weight: 7 kg.

Country of manufacturer - Ukraine

Manufacturer - Burenka

Для коз1-40 коз
LinerSilicone (transparent)
Teatcup ShellPolypropylene (plastic)
Bucket LidPolycarbonate (transparent plastic)
Milking systemPair (imitation manual milking) / Can lid polycarbonate
Pump Protection Unitwithout BZN (without protection against moisture)
Shaft rotation speed3000 rpm
Number of plates in the pumpGraphite - 2pcs
Pump typeDry rotary
Гарантия24 месяца
Доставка/ОплатаДоставка до 5 дней/Оплата при получении
ПредназначениеДля коз и овец
МатериалСиликон