Dry Milking machine "Bilka-4 mini"

Dry Milking machine "Bilka-4 mini" is intended for use in households or small farms, and is designed to serve from 1 to 80 goats per hour.

The dry rotary vacuum pump is easy to start in cold weather, easy to operate, easy to maintain and due to a number of technical upgrades is much more powerful and at the same time quieter than its predecessor. The vacuum pump is mounted on a handy frame with two sturdy wheels and an extendable handle that makes it easy to move the milking machine in any direction. Underneath the frame is a spacious air reservoir with two transparent covers for easy condensate drainage.

Milking goats is the most time consuming and complicated process. Milking accounts for more than half of the labour required to service the goats. Manually milked milk is mechanically and bacterially contaminated. Hand milking causes occupational hand disease for the milkmaids due to the large number of repetitive movements. The use of the milking machine will produce clean milk, increase labour productivity and reduce the cost of milk.

By buying the milking machine "Belka-4 mini 1500" you invest in your health and the health of your goat, improve milk quality, save time on servicing goats and get pleasure from using quality milking equipment.

General information:

• Machine type: stationary;
• Maximum capacity of 80 goats per hour;
• Simultaneous milking of 4 goats;
• Material of the milk tank: aluminium;
• Capacity of the milk tank: 20 l;
• Type of teat cups: plastic;
• Milk tank lid: polypropylene;
• Chassis design: wheeled cart;

The vacuum installation of the milking machine consists of an electric motor and a dry rotary pump which is mounted on the motor shaft without any couplings or pulleys. This construction makes the milking machine small and compact, but powerful and high yielding.

The air-cooled dry rotary vacuum pump is designed to produce the vacuum needed for smooth milking machine operation and productive milking of cows. It is easy to start and work in cold weather and does not freeze, unlike oil pumps.

Inside the vacuum pump there is a rotating rotor (1), inside which the graphite vanes (2) move freely. As the rotor rotates, the vanes move in the grooves, changing the working volume in the chamber. The suction volume increases and creates a vacuum between the blades; when the volume decreases between the blades, the pressure increases and the air escapes through the silencer.

The vacuum unit is equipped with:

1. Vacuum pump is a dry rotary vane vacuum pump with two graphite plates, a 0.75kW electric motor and a speed of 3000rpm. Complete with switch-off button and 2 m electric cable with grounding plug.

2. Silencer with increased efficiency.

Technical features:

• Vacuum pump: dry rotary vane type;
• Number of plates: 2 pcs;
• Plate material: Graphite;
• Electric power: 0.75 kW;
• Electricity supply: 220V single-phase;
• Max. vacuum pressure: 0.06 mPa (60 kPa);
• Volume of pumped air at idle speed: 220 l/min (7m3/hour);
• Shaft speed: 3000 rpm; Speed of shaft rotation.

Mass dimensions:

Vacuum unit:

-Box size: 56x39x42 cm;

-Weight: 26kg.

Milking bucket (set of 2 pieces) :

-Box size: 30x30x50 cm;

-Weight: 7 kg.

Country of manufacturer - Ukraine

Manufacturer - Byrenka