Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone

Сall back Write to us
Reduced price! Доильный аппарат Буренка-2 комби 1500 Expand

Dry Milking machine "Korivka-2 combi"

New

Dry Milking machine "Korivka-2 combi" is intended for domestic conditions and for milking from 1 to 20 cows. It is completed with a 1500 rpm dry rotary vacuum unit with extended service life and two 20 litre aluminium milk canisters with combined stainless steel cups, plastic lids on the canisters and standard 140 cm2 collectors.

More details

  • Combined (plastic + metal)
  • Stainless (metal)
  • Rubber (black, replacement 6 months.)
  • Silicone (transparent, replacement 2 years)
  • Standard 140 cm3 (plastic)
  • Increased 240 cm3 (plastic, soft milking)
  • Polypropylene (plastic)
  • Aluminum (metal)
  • Push pull (synchronous)
  • Pairwise (manual milking imitation) / Bucket lid transparent
  • без БЗН
  • с БЗН

13 800,00 грн

14 050,00 грн

-250,00 грн

Dry Milking machine "Korivka-2 combi" is suitable for domestic usage and for milking from 1 to 20 cows. It is completed with a 1500 rpm dry rotary vacuum unit with extended service life and two aluminium milk canisters of 20 litres with combined stainless steel cups, plastic lids on the canisters and standard 140 cm2 collectors.

General characteristics:

  • Type of milking machine: stationary with mobile vacuum unit;
  • Recommended continuous working time: 120 minutes, rest 40 minutes;
  • Working temperature of the pump: 80-90°C;
  • Recommended capacity: 20 cows;
  • Simultaneous milking: 2 cows;
  • Milking time of one cow: 6-8 minutes;
  • Material of milk tank: aluminium;
  • Milk tank capacity: 20 litres;
  • Material of milking cups: stainless steel and plastic;
  • Milk tank lid material: plastic 

     Technical specifications:

  • Vacuum pump: dry rotary vane type;
  • Number of plates: 4 pcs;
  • Plate material: Graphite;
  • Electric power: 0.55 kW;
  • Electricity supply: 220V single-phase;
  • Max. vacuum pressure: 0.08 mPa (80 kPa);
  • Volume of pumped air at idle speed: 220 l/min (7m3/hour);
  • Shaft speed: 1500 rpm.

Dry Milking machine "Korivka-2 combi" is designed for domestic use and consists of two main parts: the vacuum unit (1) two milking buckets (2) with milking equipment (3).

They are placed separately from each other and connected by a 2 m long vacuum hose. This construction allows the hose to be extended up to 10 m, making it possible to move the vacuum unit to another room or to the required distance from the cow. 

The milking machine requires a constant and stable working vacuum, which is created by a vacuum pump. 

The vacuum installation of the milking machine consists of an electric motor and a dry rotary pump, which is installed on the motor shaft without any couplings or pulleys. This construction makes the milking machine small and compact, but at the same time powerful and highly productive. 

The air-cooled dry rotary vacuum pump is used to generate the vacuum needed for normal milking machine operation and productive milking of cows. It is easy to start and work in cold weather and does not freeze, unlike oil pumps.

Inside the vacuum pump there is a rotating rotor (1), inside which the graphite vanes (2) move freely. As the rotor rotates, the vanes move in the grooves, changing the working volume in the chamber. During suction, the volume increases, creating a vacuum between the blades; when the volume between the blades decreases, the pressure increases and the air escapes through the silencer. 

The milking machine works thanks to a two-stroke milking system (compression and suckling) with a pulse rate of (65±5) pulses per minute and the use of milking cups.

The two-dimensional design of the milking cups consists of two chambers:

  •  The external one, which is between the teat rubber and the inside of the milking cup, and connects to the pulsator through the collector distributor;
  •  The internal one, which is inside the liners and connects to the collector to collect and discharge milk into the milking bucket.The internal chamber maintains a stable vacuum of between 47 and 52 kPa.

The external chamber is alternately filled with vacuum and air using a pulsator, which causes the teat rubbers to pulsate. In the milking mode, there is a constant vacuum in the outside and inside chambers of the teat, which causes the milk to flow out of the udder. In compression mode, atmospheric pressure enters the outer chamber and the liners are compressed, squeezing the teat. 

The milking machine is equipped with:

1. 20 litre aluminium milking bucket. -2 pcs.

2. PVC milk hose 4 m long.

3. Milking bucket lid gasket with sealing skirt -2pc.

4. Polypropylene milking bucket lid -2pc.

5. Polypropylene tees and elbows.

6. Vacuum hose 11x23 4m long.

7. Pulsator non-adjustable two-stroke. -2 pcs.

8. Vacuum tube 7x14 4 m long.

9. Plastic manifold 140 cm3 -2pc.

10. Rubber nipple - 8 pieces.

11. Polypropylene clamp - 8 pieces.

12. Transparent 7x14 vacuum tube - 2 m length.

13. Stainless milking cup with plastic head - 8 pcs.

14. Rinsing brush - 1 set (two short and one long).

15. Technical documentation and passport with warranty card.

Translated with www.DeepL.com/Translator (free version)

 

The vacuum unit is complete:

1. Dry rotary vane vacuum pump with four graphite plates, 0.55 kW electric motor, 1500 rpm. Complete with switch-off button and 2 m electric cable with grounding plug.

2. High efficiency silencer.

3. metal frame with retractable handle and 3L compressed air reservoir.

4. Plastic wheel - 2 pieces,

5. Transparent receiver cap with gasket - 2 pcs,

6. Vacuum regulator.

7. Vacuum gauge.

8. Corner with transparent hose for connecting the pump to the receiver.

Translated with www.DeepL.com/Translator (free version)

Mass dimensions:

Vacuum unit:
- Box size: 56x39x42 cm;

- Weight: 26kg.

Milking bucket:
- Box size: 30x30x50 cm;

- Weight: 7 kg.

Country of manufacturer - Ukraine

Manufacturer - Burenka

Производительность1-20 коровы
LinerRubber (black)
Teatcup ShellCombined (plastic + metal)
Milking ClawStandard 140 cm3 (plastic)
Bucket LidPolypropylene (plastic)
Milking systemPush pull (synchronous)
Pump Protection Unitwithout BZN (without protection against moisture)
Shaft rotation speed1500 rpm
Number of plates in the pumpGraphite - 4pcs
Pump typeDry rotary
Гарантия24 месяца
Доставка/ОплатаДоставка до 5 дней/Оплата при получении
ПредназначениеДля коров
МатериалКаучук