Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone

Сall back Write to us
Доильный аппарат Буренка-1 стандарт 3000 Expand

Milking machine Byrenka-1 standard 3000

5 Review(s)
Буренка

New

Milking machine "Byrenka-1 standard 3000" is designed for use in domestic conditions and maintenance from 1 to 5 cows. It is equipped with a dry rotor type installation at 3000 rpm and one 20 liter aluminum milk can with strong polypropylene cups, a polypropylene can lid on the can and a standard collector 140 cm2.

More details

  • Polypropylene (plastic)
  • Combined (plastic + metal)
  • Stainless (metal)
  • Rubber (black, replacement 6 months.)
  • Silicone (transparent, replacement 2 years)
  • Standard 140 cm3 (plastic)
  • Increased 240 cm3 (plastic, soft milking)
  • Stainless 140 cm3 (metal)
  • Polypropylene (plastic)
  • Aluminum (metal)
  • Aluminum 20 L
  • Push pull (synchronous)
  • Pairwise (manual milking imitation) / Bucket lid transparent
  • without BZN (without protection of the pump from moisture)
  • with BZN (protection of the pump from moisture)
  • without PDU (without remote control)
  • with PDU (with remote control)
  • Without detergent
  • With detergent

6 400,00 грн

Milking machine "Burenka-1 Standard 3000"


The milking machine "Burenka-1 Standard 3000"
is intended for domestic use and maintenance from 1 to 5 cows. It is equipped with a dry rotor type installation at 3000 rpm and one 20 liter aluminum milk can with strong polypropylene cups, a polypropylene can lid on the can and a standard collector 140 cm2.

Main advantages:

  • Pump dry rotary type
  • Aluminum Milking Bucket
  • Polypropylene teat cups
  • Polypropylene milking bucket cover

General characteristics:

  • Type of milking machine: stationary with a mobile vacuum unit;
  • Recommended time of continuous work: 60 minutes, rest 40 minutes;
  • Pump operating temperature: 80-90 ° С;
  • Recommended performance: 5 cows;
  • Simultaneous milking: 1 cow;
  • Milk time per cow: 6-8 minutes;
  • Milk tank material: aluminum;
  • Capacity of a dairy tank: 20 l .;
  • Material of teat cups: polypropylene;
  • Milk tank cover material: polypropylene.

Specifications:

  • Vacuum pump: dry rotary vane type;
  • Pump material: cast iron;
  • Engine winding material: copper;
  • Number of plates: 2 pcs .;
  • Plate material: graphite;
  • Electric engine power: 0.75 kW;
  • Power supply: single-phase network 220V;
  • Maximum vacuum pressure: 0.06 MPa (60 kPa);
  • The volume of pumped air at idle: 220 l / min (7m3 / h);
  • Shaft rotation speed: 3000 rpm

Milking machine complete set:

  1. Milk hose PVC with a length of 2 m.
  2. Gasket lid milking bucket with sealing skirt.
  3. Polypropylene milking bucket cover.
  4. Polypropylene tee and nook.
  5. Vacuum hose 11x23 with a length of 2 m.
  6. Pulsator unregulated push-pull.
  7. Vacuum tube 7x14 with a length of 2 m.
  8. Plastic collector 140 cm3.
  9. Rubber nipple rubber - 4 pcs.
  10. Polypropylene clip - 4 pcs.
  11. Transparent vacuum tube 7x14 -1 m.
  12. Polypropylene teat cup - 4 pcs.
  13. Brushes for washing 1 set (two short and one long).
  14. Technical documentation and passport with warranty card.

Complete set of vacuum unit:

  1. Dry rotary vacuum pump with two graphite plates, and an electric motor with a capacity of 0.75 kW and a speed of 3000 rpm. It is equipped with an off button and a 2 m long electric cable with a grounding plug.
  2. Muffler increased efficiency.
  3. The metal frame is painted with powder paint with a retractable handle and a 3-liter receiver.
  4. Plastic wheel - 2 pcs.,
  5. Transparent receiver cover with gasket - 2 pcs.,
  6. Vacuum regulator.
  7. Vacuum gauge.
  8. Corner with a transparent hose to connect the pump to the receiver.

Overall dimensions:

Vacuum installation:
- Box size: 56x39x42 cm;
- Weight: 23 kg.
 Milking bucket:
- Box size: 30x30x50 cm;
- Weight: 7 kg.

Country of origin - Ukraine

Manufacturer - Burenka

Teatcup ShellPolypropylene (plastic)
LinerRubber (black)
Milking ClawStandard 140 cm3 (plastic)
Bucket LidPolypropylene (plastic)
Milking systemPush pull (synchronous)
Pump Protection Unitwithout BZN (without protection against moisture)
Shaft rotation speed3000 rpm
Number of plates in the pumpGraphite - 2pcs
Pump typeDry rotary
Гарантия12 месяцев
Доставка/ОплатаДоставка до 5 дней/Оплата при получении
Grade 
2018-06-05

молодці

Все оперативно. Якість відмінна. Рекомендую.

    Grade 
    2017-03-05

    Нормальний апарат

    Доїть корову хорошо, гуде не сильно, за такі гроші кращий не знайти.

      Grade 
      2017-02-13

      Очень доволена

      За 2 года работы поменяла резинки в стаканах, молочный шланг и крышку коллектора, которая треснула от удара. Все работает отлично, мы очень довольны!

        Grade 
        2017-02-10

        Цена+качество

        Покупал в 2010 году.За все время заменил пульсатор,молочный шланг и 3 комплекта сосковой резины.Остальное все в норме.Доим 4 коровы.Рекомендую.

          Grade 
          2017-02-08

          Отличная цена

          Самый дешевый доильный аппарат среди аппаратов с роторным воздушным насосом. Пластмассовые стаканы никак не влияют на работу аппарата. Рекомендую

            Write your review! !

            Write a review

             Milking machine Byrenka-1 standard 3000

            Milking machine Byrenka-1 standard 3000

            Customers who bought this product also bought: