Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone

Сall back Write to us
Доильный аппарат Буренка-1 комби 3000 Expand

Milking machine Byrenka-1 kombi 3000

New

Milking machine "Byrenka-1 kombi 3000" is intended for use in domestic conditions and maintenance from 1 to 5 cows. It is equipped with a dry rotor type installation at 3000 rpm and one 20 liter aluminum milk can with combined stainless steel cups, a plastic lid on the can and a standard collector 140 cm2.

More details

  • Combined (plastic + metal)
  • Stainless (metal)
  • Rubber (black, replacement 6 months.)
  • Silicone (transparent, replacement 2 years)
  • Standard 140 cm3 (plastic)
  • Increased 240 cm3 (plastic, soft milking)
  • Stainless 140 cm3 (metal)
  • Polypropylene (plastic)
  • Aluminum (metal)
  • Aluminum 20 L
  • Push pull (synchronous)
  • Pairwise (manual milking imitation) / Bucket lid transparent
  • without BZN (without protection of the pump from moisture)
  • with BZN (protection of the pump from moisture)
  • without PDU (without remote control)
  • with PDU (with remote control)
  • Without detergent
  • With detergent
  • Standard
  • Export

6 550,00 грн

Milking machine "Burenka-1 combi 3000"


The milking machine "Burenka-1 combi 3000" is intended for domestic use and maintenance from 1 to 5 cows. It is equipped with a dry rotor type installation at 3000 rpm and one 20 liter aluminum milk can with combined stainless glasses, a plastic lid on the can and a standard collector of 140 cm2.

Main advantages:

  • Pump dry rotary type
  • Aluminum Milking Bucket
  • Stainless tempered glass with polypropylene tips
  • Polypropylene milking bucket cover


General characteristics:

  • Type of milking machine: stationary with a mobile vacuum unit;
  • Recommended time of continuous work: 60 minutes, rest 40 minutes;
  • Pump operating temperature: 80-90 ° С;
  • Recommended performance: 5 cows;
  • Simultaneous milking: 1 cow;
  • Milk time per cow: 6-8 minutes;
  • Milk tank material: aluminum;
  • Capacity of a dairy tank: 20 l .;
  • Milking cup material: stainless steel and polypropylene;
  • Milk tank cover material: polypropylene.


Specifications:

  • Vacuum pump: dry rotary vane type;
  • Pump material: cast iron;
  • Engine winding material: copper;
  • Number of plates: 2 pcs .;
  • Plate material: graphite;
  • Electric power: 0.75 kW;
  • Power supply: single-phase network 220V;
  • Maximum vacuum pressure: 0.06 MPa (60 kPa);
  • The volume of pumped air at idle: 220 l / min (7m3 / h);
  • Shaft rotation speed: 3000 rpm


Milking machine complete set:

1. Aluminum milking bucket on 20 liters.
2. PVC milk hose with a length of 2 m.
3. Gasket lid milking bucket with sealing skirt.
4. Plastic cover of the milking bucket.
5. Polypropylene tee and corner.
6. Vacuum hose 11x23 with a length of 2 m.
7. Pulsator unregulated push-pull.
8. Vacuum tube 7x14, length 2 m.
9. Plastic collector 140 cm3.
10. Rubber nipple rubber - 4 pcs.
11. Polypropylene clip - 4 pcs.
12. Vacuum tube 7x14 transparent, 1 m long.
13. Stainless steel tempered glass with plastic head - 4 pcs.
14. Brushes for washing 1 set (two short and one long).
15. Technical documentation and passport with warranty card.

Complete set of vacuum unit:

1. Vacuum pump of dry rotary type with two graphite plates, and an electric motor with a capacity of 0.75 kW and a number of revolutions of 3000 rpm. It is equipped with an off button and a 2 m long electric cable with a grounding plug.
2. Muffler increased efficiency.
3. Metal frame with retractable handle and 3-liter receiver.
4. Plastic wheel - 2 pcs.,
5. Transparent receiver cover with gasket - 2 pcs.,
6. Vacuum regulator.
7. Vacuum gauge.
8. Corner with a transparent hose to connect the pump to the receiver.

Overall dimensions:

Vacuum installation:
- Box size: 56x39x42 cm;
- Weight: 23 kg.
Milking bucket:
- Box size: 30x30x50 cm;
- Weight: 7 kg.

Country of origin - Ukraine

Manufacturer - Burenka

Teatcup ShellCombined (plastic + metal)
LinerRubber (black)
Milking ClawStandard 140 cm3 (plastic)
Bucket LidPolypropylene (plastic)
Milking systemPush pull (synchronous)
Pump Protection Unitwithout BZN (without protection against moisture)
Shaft rotation speed3000 rpm
Number of plates in the pumpGraphite - 2pcs
Pump typeDry rotary
Гарантия12 месяцев
Доставка/ОплатаДоставка до 5 дней/Оплата при получении

Customers who bought this product also bought: