Working: Mon.-Fri .: 09:00 - 17:00; Sat-Sun: by telephone

Сall back Write to us
Reduced price! Доильная установка ДУ-3000 в сборе на каркасе Expand

Dry Vacuum pump"DU-3000" assembled on the frame

New

Dry Vacuum pump"DU-3000" assembled on the frame of a dry rotary type with natural air cooling is intended to create a vacuum of the required productive milking of cows. A vacuum pump of a dry rotary type with a capacity of 0.75 kW and a shaft rotation speed of 3000 rpm is installed on a convenient frame with wheels, a retractable handle, a receiver, a vacuum meter and a vacuum regulator.

More details

  • без БЗН
  • с БЗН

7 500,00 грн

7 700,00 грн

-200,00 грн

Dry Vacuum pump"DU-3000" assembled on the frame

Dry Vacuum pump"DU-3000" assembled on a frame strong  of a dry rotary type with natural air cooling is designed to create a vacuum of vacuum necessary for the normal operation of the milking machine and productive milking of cows. A two-blade dry-rotary pump with a capacity of 0.75 kW and a shaft speed of 3000 rpm is installed on a convenient frame with wheels, retractable handle, receiver, vacuum meter and vacuum regulator. 

The vacuum unit strong of the milking machine consists of an electric motor and a dry rotary pump that is installed on the motor shaft without any couplings or pulleys. Such a structure of the milking machine makes it small and compact, but at the same time powerful and highly productive. It easily starts and runs in the cold season, and does not freeze, unlike oil-type pumps. 

Inside the vacuum pump there is a rotating rotor , inside which graphite vanes  move freely. During the rotation of the rotor blades move in grooves, changing the working volume in the chamber. During suction there is an increase in volume, which creates a vacuum between the blades, and with a decrease in the volume between them, the pressure increases, and the air escapes through the muffler. 

Complete set of vacuum pump

1. Dry rotary vacuum pump with two graphite plates, and an electric motor with a capacity of 0.75 kW and a speed of 3000 rpm. Equipped with an off button and a 2 m long electric cable with a grounding plug.
2. Increased silencer efficiency.
3. Metal frame with retractable handle and 3-liter receiver.
4. Plastic wheel - 2 pcs.,
5. Transparent receiver cover with gasket - 2 pcs.,
6. Vacuum regulator.
7. Vacuum gauge.
8. Corner with a transparent hose to connect the pump to the receiver. 

Specifications: 

  1. Vacuum pump:
  2. dry rotary vane type;
  3. Number of plates: 2 pieces; 
  4. Plate material: graphite; 
  5. Electrical power: 0.75 kW;
  6. Power supply: 220V single-phase network; 
  7. Maximum vacuum pressure: 0.06 MPa (60 kPa); 
  8. Volume of pumped air at idle: 220 l / min (7m3 / h);
  9. Shaft rotation speed: 3000 rpm. 

Overall dimensions: 

Vacuum installation:
- Box size: 56x39x42 cm;
- Weight: 23 kg.

Country of origin - Ukraine

Manufacturer - Burenka 

Pump Protection Unitwithout BZN (without protection against moisture)
Shaft rotation speed3000 rpm
Number of plates in the pumpGraphite - 2pcs
Pump typeDry rotary
Гарантия12 месяцев
Доставка/ОплатаДоставка до 5 дней/Оплата при получении